CEH logo - Return to the homepage

[ Skip to content ] [ View sitemap ]

CCH cabinet heaters 3kW to 12kW

CCH




Applications

Higher capacity cabinet blower heaters for larger commercial areas such as entrance lobbies, stairways, waiting rooms, classrooms and churches. They can be fully or partially recessed giving added protection and saving valuable space.

Back to top Back to top

Features

  • suitable for surface or recessed wall, floor and ceiling mounting.
  • eight possible inlet/outlet configurations.
  • although shipped as required, airflow configuration is site convertible.
  • heavy duty finned metal sheathed elements.
  • auto reset over temperature cut out along full length of elements.
  • additional manual reset over-temperature safety cut-out
  • permanently lubricated two speed motor, resiliently mounted.
  • tamperproof thermostat and controls.
  • two heat switch.
  • fan only switch.
  • inlet filter as standard.
  • beige textured finish.

Back to top Back to top

Options

Trim frame to complete recessed mounting (CCH-TFxx).

Back to top Back to top

Specification

Heaters are shipped with required airflow arrangement but can be site modified if necessary.

Please advise airflow required as per illustration (ie ABCorD)

Cat No Watts Volts Air Vol m3/hr L H D Wt
High Low High Low mm mm mm kg
CCH-03-1 3000 2000 240 1P 425 390 840 635 240 46
CCH-03-3 3000 2000 415 3P&N 425 390 840 635 240 46
CCH-04-1 4000 2000 240 1P 425 390 840 635 240 47
CCH-04-3 4000 2000 415 3P&N 425 390 840 635 240 47
CCH-05-1 5000 3000 240 1P 425 390 840 635 240 48
CCH-05-3 5000 3000 415 3P&N 425 390 840 635 240 48
CCH-06-3 6000 3000 415 3P&N 425 390 840 635 240 48
CCH-08-3 8000 4000 415 3P&N 850 780 1170 635 240 65
CCH-10-3 10000 5000 415 3P&N 850 780 1170 635 240 67
CCH-12-3 12000 6000 415 3P&N 850 780 1170 635 240 69
CCH-TF33 Trim frame (3-6 kW) 2
CCH-TF46 Trim frame ( 8-12kW) 2


Back to top Back to top

Installation

These heaters are designed for floor wall or ceiling mounting. They must be located so that the inlet grille is more than 150mm and the outlet grille more than 600mm from any surface perpendicular to the airflow. The ends of the unit can have zero clearance to adjacent surfaces. A trim frame is available to finish the edges of the recess for fully or semi recessed units. Mounting holes are provided in the back of the unit accessible through the fan compartment. If necessary the fan tray can be removed for easier access.

An integral thermostat is fitted as standard. A remote thermostat and/or programmer can be easily connected into the control circuit via the integral connector block.

Electrical connections of adequate size and rating should be made by a suitably qualified person in accordance with the latest edition of the IEE Requirements for Electrical Installation (BS7671:1992)

Back to top Back to top